PRODUCT

image.png

Hubei Qiu's Energy-Saving Building Materials High-tech Co.Ltd


Headquarters Address: 9/F, Building 2, Pell Center, 26 Binhu Road, Donghu High-tech Zone, Wuhan, Hubei, China


Phone: 0086-027-87269988


Production Base: No. 9 Hongdong Road, Qiankou Management District, Qianjiang City, Hubei Province


Phone: 0086-0728-6203456


 Website:en.qstl.com



Varnishing glue

Your current location: HOME >> Products >> Insulation products
  • Varnishing glue

  • hotline: 400-074-6668
  • Immediate
product

■Product use:

The accessory product specially developed for the protective surface layer of QS graphite molded board is coated on the protective surface layer of QS graphite molded board to enhance the mechanical strength and leveling waterproof function of the system.


■ Product Features:

Excellent flexibility, good crack resistance, high bonding strength, waterproof penetration, fire protection, protection of insulation layer, and excellent adhesion and adhesion for the outer surface layer, excellent construction performance, water-based environmentally friendly products.


■Product Execution Standard: Q/QS001-2013


■Construction method:

According to water: QS plastering paste = (0.25-0.30): 1 (weight ratio) ratio QS plastering paste is poured into the proportioned pre-weighed water, using a hand blender or mortar mixer for stirring, mechanical stirring 3 - 5 minutes to the viscosity required for the construction. The mixed plaster should be used up within 2 hours. With the mixing, it is strictly forbidden to add sand and any other materials during the mixing process. The solidified and hardened glue should not be used again.

The prepared glue is directly smeared with a spatula.


■ Theoretical dosage: 5mm thick, the theoretical value is about 5kg/m2.


■Package storage: 25kg ± 0.5kg packaging. Moisture-proof and rain-proof. The shelf life is 3 months. This product is water-based and environmentally friendly. It is non-explosive, non-flammable, easy to carry and transport.


■ Note:

1) The temperature of the construction environment and the base wall should not be lower than 5 °C wind 5, to avoid rainy days;

2) It is strictly forbidden to add sand, cement and other additives and construction without using auxiliary products, otherwise it will cause serious quality and safety consequences;

3) The mortar that has solidified and hardened cannot be reused;

4) Do not eat, touch the eyes, clean and treat with water.


This website:http://en.qstl.com/product/598.html

Recently, browse:

  • contact number
    18623112728
  • message
  • Website
  • Online consultation