Hubei Qiu's Energy-Saving Building Materials High-tech Co.Ltd

Headquarters Address: 9/F, Building 2, Pell Center, 26 Binhu Road, Donghu High-tech Zone, Wuhan, Hubei, China

Phone: 0086-027-87269988

Production Base: No. 9 Hongdong Road, Qiankou Management District, Qianjiang City, Hubei Province

Phone: 0086-0728-6203456

Insulation protective glue

Your current location: HOME >> Products >> Insulation products
  • Insulation protective glue

  • hotline: 400-074-6668
  • Immediate

■Product use:

The accessory product specially developed for the protection of the insulation layer of QS graphite molding plate, the surface layer of the QS graphite molding plate can enhance the functions of heat preservation, heat insulation, waterproof, fireproof and leveling protection of the board surface.

■ Product Features:

1. It is non-combustible material, fireproof, thermal insulation, good bonding strength, light weight, anti-slip;

2. Good gas permeability, low linear shrinkage and good durability;

3. Easy to construct, environmentally safe and reliable;

■Product Execution Standard: Q/QS001-2013

■Construction method:

According to the water: QS insulation protective glue = 0.7:1 (weight ratio) ratio QS insulation protective glue is poured into the proportioned pre-weighed water, using a hand blender or mortar mixer for mixing, mechanical stirring 3-5 Minutes, to the viscosity required for the construction. The mixed thermal insulation protective glue should be used up within 2 hours. It can be used with the mixing. It is strictly forbidden to add sand and any other materials and impurities during the mixing process. The solidified and hardened glue should not be used again.

The prepared glue was directly applied to the surface of the QS graphite molded board which had been applied to the wall with a spatula.

■Reference theoretical dosage: inner wall 5mm-7mm thick, about 3kg/m2; outer wall 10mm thick, about 5kg/m2.

■Package storage: 25kg ± 0.5kg packaging. Moisture-proof and rain-proof. The shelf life is 3 months. This product is water-based and environmentally friendly. It is non-explosive, non-flammable, easy to carry and transport.

■ Note:

1) The temperature of the construction environment and the base wall should not be lower than 5 °C, and the wind power should be below 5, to avoid rainy days;

2) It is strictly forbidden to add sand, cement and other additives and construction without using supporting products, otherwise it will cause serious quality and safety consequences;

3) The mortar that has solidified and hardened cannot be reused;

4) Do not eat, touch the eyes, clean and treat with water.

This website:

The last one:Bonding glue
The next one:Varnishing glue

Recently, browse:

  • contact number
  • message
  • Website
  • Online consultation