PRODUCT

image.png

Hubei Qiu's Energy-Saving Building Materials High-tech Co.Ltd


Headquarters Address: 9/F, Building 2, Pell Center, 26 Binhu Road, Donghu High-tech Zone, Wuhan, Hubei, China


Phone: 0086-027-87269988


Production Base: No. 9 Hongdong Road, Qiankou Management District, Qianjiang City, Hubei Province


Phone: 0086-0728-6203456


 Website:en.qstl.com



JG-Q008 tile renovation rubber powder

Your current location: HOME >> Products >> Coating accessory products
  • JG-Q008 tile renovation rubber powder

  • hotline: 400-074-6668
  • Immediate
product

■Product use:

It is a new product developed by the company's independent intellectual property rights. It is suitable for the renovation of high-grade grade coatings on existing ceramic tiles, mosaics and water stone.


■ Product Features:

○ It has strong adhesion and adheres firmly to the surface of tile or mosaic brush stone without falling off or peeling off.

○Excellent flexibility to compensate for existing cracks on the wall and prevent new cracks.

○ It has excellent filling properties, gas permeability, water resistance, acid resistance, alkali resistance, antifreeze and easy to use.

○ Non-toxic, tasteless and non-radiation meet the requirements of green environmental protection.


■Executive standard: JG/T157-2009


■ How to use:

Rinse the old wall with a high-pressure water gun, and then use a wire brush to remove the dirt that has not been washed away. After the powder: clear water = 1:0.25 ~ 0.3 (weight ratio), stir evenly to the paste, directly scrape the tile, mosaic Water brush stone surface.


■Construction environment: The temperature should not be lower than 5 °C, and construction should be avoided in bad weather; the amount of clean water can be adjusted according to the coating, construction environment, high temperature and low temperature.


■Supporting system: JG-Q008 tile renovation rubber powder 1-2 times

JG-Q005 polymer anti-cracking leveling coarse rubber powder 1-2 times

JG-Q006 polymer anti-cracking leveling fine rubber powder 1-2 times


■Storage: The shelf life is 3 months, and it is stored in a cool, clean and dry place (above 0°C, below 35°C). This product is non-toxic and environmentally friendly.

Product, no explosion, no burning, easy to carry, transport.


■Packing specification: 25kg/bag


■ Note:

1. The surface of the finished object must be dry, firm, smooth, clean, free of voids, dust-free, oil-free, loose material, no water seepage, and remove the floating ash before construction.

2. This product can not be mixed with water containing salt, acid and alkali solution; it is forbidden to stir dry the putty and add water. One coat should not exceed 0.8mm, the surface is dry for 2 hours, the temperature needs to reach 25 °C, the dry time is 24 hours, and the re-scraping time is after 24 hours.

3. After opening the seal, pay attention to the seal, do not eat, touch the eyes and apply clean water in time for cleaning and treatment.


This website:http://en.qstl.com/product/603.html

Recently, browse:

  • contact number
    18623112728
  • message
  • Website
  • Online consultation