Hubei Qiu's Energy-Saving Building Materials High-tech Co.Ltd
Headquarters Address: 9/F, Building 2, Pell Center, 26 Binhu Road, Donghu High-tech Zone, Wuhan, Hubei, China
Production Base: No. 9 Hongdong Road, Qiankou Management District, Qianjiang City, Hubei Province
It is suitable for leveling of various building exterior walls, especially for the leveling of texture coatings. Used in combination with various exterior paints, it can ensure the decoration and protection of the paint, and avoid cracking and peeling of the paint film caused by the substrate problem.
■ Product Features:
○Excellent adhesion, overcoming the phenomenon of peeling, cracking and falling off of ordinary putty layer;
○Good filling, excellent waterproof and breathable;
○Excellent flexibility to cover existing cracks on the wall;
○ Fast drying and easy construction;
○No odor, no radiation meets the requirements of green environmental protection.
■Executive standard: JG/T157-2009
■ How to use:
Texture-specific rubber powder: water = 1: 0.25 ~ 0.28 (weight ratio) Stir evenly until the paste is directly applied with a spatula. The glued special rubber powder (putty) should be used up within 2 hours. It is strictly forbidden to add sand and any other materials during the mixing process. The solidified and hardened putty can not be used again.
If you do not use the company's supporting products and construction technology to pay attention to the construction process specifications, it will lead to serious quality consequences.
■Construction environment: The temperature should not be lower than 10 °C, and construction should be avoided in bad weather; the amount of clean water can be adjusted according to the scraping, construction environment, high temperature and low temperature.
■Storage: The shelf life is 3 months. Store in a cool, clean and dry place (above 0°C and below 35°C). This product is environmentally friendly, non-explosive, non-flammable, easy to carry and transport.
■Packing specification: 25kg/bag
1. The surface of the finished object must be dry, firm, smooth, clean, free of voids, dust-free, oil-free, loose material, and non-seepage. The newly-created wall should be dry without obvious water wetness (surface moisture content is less than 10%) , PH value is less than 10), remove the floating ash before construction, before construction.
2. This product can not be mixed with water containing salt, acid and alkali solution; it is forbidden to stir dry the putty and add water. A scraping coating should not exceed 0.8mm, which is subject to the dryness of the putty film; depending on the temperature, the water should be protected 1-2 times the next day.
3. After opening the seal, pay attention to the seal, do not eat, touch the eyes and apply clean water in time for cleaning and treatment.