PRODUCT

image.png

Hubei Qiu's Energy-Saving Building Materials High-tech Co.Ltd


Headquarters Address: 9/F, Building 2, Pell Center, 26 Binhu Road, Donghu High-tech Zone, Wuhan, Hubei, China


Phone: 0086-027-87269988


Production Base: No. 9 Hongdong Road, Qiankou Management District, Qianjiang City, Hubei Province


Phone: 0086-0728-6203456


 Website:en.qstl.com



JG-Q006 polymer crack-resistant flat rubber powder

Your current location: HOME >> Products >> Coating accessory products
  • JG-Q006 polymer crack-resistant flat rubber powder

  • hotline: 400-074-6668
  • Immediate
product

■Product use:

Suitable for leveling the exterior walls of various buildings. Used in combination with various exterior paints, it can ensure the decoration and protection of the paint, and avoid cracking and peeling of the paint film caused by the substrate problem.


■ Product Features:

○ has a strong adhesion;

○Good filling, good gas permeability, excellent waterproof and alkali resistance;

○Excellent flexibility to prevent cracking;

○ Fast drying, easy to polish and save labor, labor, and use more convenient;

○No taste, no radiation meets the requirements of green environmental protection.


■Executive standard: JG/T157-2009


■Usage method: According to the powder: water = 1: 0.25 ~ 0.28 (weight ratio), stir evenly until the paste is used, and then directly apply with a spatula. The stirred leveling fine powder (putty) should be used up within 2 hours. It is strictly forbidden to add sand and any other materials during the mixing process. The solidified and hardened putty can not be used again.


■Construction environment: The temperature should not be lower than 10 °C, and construction should be avoided in bad weather; the amount of clean water can be adjusted according to the scraping, construction environment, high temperature and low temperature.


■Storage: The shelf life is 3 months. Store in a cool, clean and dry place (above 0°C and below 35°C). This product is environmentally friendly, non-explosive, non-flammable, easy to carry and transport.


■Packing specification: 25kg/bag


■ Note:

1. The surface of the finished object must be dry, firm, smooth, clean, free of voids, dust-free, oil-free, loose material, and non-seepage. The newly-created wall should be dry without obvious water wetness (surface moisture content is less than 10%) , PH value is less than 10), remove the floating ash before construction, before construction.

2. This product can not be mixed with water containing salt, acid and alkali solution; it is forbidden to stir dry the putty and add water. A scraping coating should not exceed 0.8mm, which is subject to the dryness of the putty film; depending on the temperature, the water should be protected 1-2 times the next day.

3. After opening the seal, pay attention to the seal, do not eat, touch the eyes and apply clean water in time for cleaning and treatment.



This website:http://en.qstl.com/product/607.html

Recently, browse:

  • contact number
    18623112728
  • message
  • Website
  • Online consultation