Hubei Qiu's Energy-Saving Building Materials High-tech Co.Ltd

Headquarters Address: 9/F, Building 2, Pell Center, 26 Binhu Road, Donghu High-tech Zone, Wuhan, Hubei, China

Phone: 0086-027-87269988

Production Base: No. 9 Hongdong Road, Qiankou Management District, Qianjiang City, Hubei Province

Phone: 0086-0728-6203456

JG-Q005 polymer protective leveling coarse rubber powder

Your current location: HOME >> Products >> Coating accessory products
  • JG-Q005 polymer protective leveling coarse rubber powder

  • hotline: 400-074-6668
  • Immediate

■Product use:

Applicable to the initial leveling of the exterior walls of various buildings. Used in combination with various exterior paints, it can ensure the decoration and protection of the paint, and avoid cracking and peeling of the paint film caused by the substrate problem.

■ Product Features:

○Excellent flexibility to cover existing cracks on the wall;

○ has a strong adhesion;

○Good filling, good gas permeability, excellent waterproof and alkali resistance;

○ Fast drying, easy to polish and save labor, labor, and use more convenient;

○No taste, no radiation, meet the requirements of green environmental protection.

■Executive standard: JG/T157-2009

■Usage method: According to the powder: water = 1: 0.25 ~ 0.28 (weight ratio), stir evenly until the paste is used, and then directly apply with a spatula. The grounded coarse rubber powder (putty) should be used up within 2 hours. It is strictly forbidden to add sand and any other materials during the mixing process. The hardened and putty can not be used again.

■Construction environment: The temperature should not be lower than 10 °C, and construction should be avoided in bad weather; the amount of clean water can be adjusted according to the scraping, construction environment, high temperature and low temperature.

■Storage: The shelf life is 3 months. Store in a cool, clean and dry place (above 0°C and below 35°C). This product is environmentally friendly, non-explosive, non-flammable, easy to carry and transport.

■Packing specification: 25kg/bag ±0.5kg

■ Note:

1. The surface of the finished object must be dry, firm, smooth, clean, free of voids, dust-free, oil-free, loose material, and non-seepage. The newly-created wall should be dry without obvious water wetness (surface moisture content is less than 10%) , PH value is less than 10), remove the floating ash before construction, before construction.

2. This product can not be mixed with water containing salt, acid and alkali solution; it is forbidden to stir dry the putty and add water. A scraping coating should not exceed 0.8mm, which is subject to the dryness of the putty film; depending on the temperature, the water should be protected 1-2 times the next day.

3. After opening the seal, pay attention to the seal, do not eat, touch the eyes and apply clean water in time for cleaning and treatment.

This website:

Recently, browse:

  • contact number
  • message
  • Website
  • Online consultation