Hubei Qiu's Energy-Saving Building Materials High-tech Co.Ltd
Headquarters Address: 9/F, Building 2, Pell Center, 26 Binhu Road, Donghu High-tech Zone, Wuhan, Hubei, China
Production Base: No. 9 Hongdong Road, Qiankou Management District, Qianjiang City, Hubei Province
This product belongs to the invention patent product of QS graphite molding board (GEPS) insulation system which is developed by our company. It is applicable to the wall decoration of all new building walls in the country and the exterior wall decoration of the existing building reconstruction wall, passive house building, steel structure building and special-shaped wall enclosing structure.
1. It adopts mechanical crushing of natural stone of various colors, and integrates the raw and auxiliary materials technology research and development of independent intellectual property rights. After the construction becomes alive, it will form a real stone texture effect, bringing a natural feeling of returning to the original;
2. Rich color selection, belonging to the color and quality of natural stone, can be produced according to the user's desired color;
3. Light weight, especially suitable for exterior decoration of exterior wall insulation, that is, meet the national energy conservation law standards for building energy conservation, and meet the user's demand for stone aesthetics;
4. Fireproof, waterproof, anti-aging, non-marking, anti-corrosion, acid and alkali resistance, stain resistance, crack prevention, self-cleaning, light load on the wall, etc., providing long-term protection for buildings;
5. It can enhance the function of heat insulation and reflection radiation of the decorative surface layer of thermal insulation board and wall enclosure structure, water-based ecological environment protection, convenient construction, safe construction and safer residence period. The construction cost is far lower than that of dry hanging stone. Same life as dry hanging stone.
■Executive standard: JG/T235-2014
■Usage method: Scratch the QS texture coating special powder for two times (with an interval of more than 8 hours) on the surface of the QS graphite molding plate insulation system after the plastering layer or the brush is up to standard - sanding with 100# sandpaper —— Spray or roll coated with black anti-alkali seal primer (4 hours apart) – elastic line (horizontal and vertical), paste color separation and cracking paper – spray real stone paint twice (24 hours apart) ) - Spray or roll coated with a real stone paint cover finish.
■Storage: The shelf life is 6 months, and it is stored in a cool, clean and dry place (above 5°C and below 35°C). This product is environmentally friendly, non-explosive, non-flammable, easy to carry and transport.
■Packing specification: color primer 23kg/barrel medium coating 35kg/barrel cover topcoat 18kg/barrel
1. Stir well during use, anti-exposure, anti-rain, anti-freeze, storage at room temperature. It is not allowed to be applied in rainy days, the temperature is below 5 °C, and the humidity is above 85%.
2. The surface of the finished object must meet the relevant national standards, dry, sturdy, smooth, clean, no voids, no dust, no oil, no loose matter, no water seepage, no new water walls (surface moisture content) Less than 10%, PH value less than 10), remove the floating ash before construction, before construction.
3. In the construction process, the supporting products of this product must be used. It is strictly forbidden to do so and strictly follow the procedures in the use method of this product, otherwise it will cause serious quality consequences.
4. Since the color of the company's color card and the color of the product are made on different base materials, the light perception is different, so the color of the wall after the survival and the color on the color card, or the user are allowed. There is a slight color difference in the color of the sample.
5. After opening the can, pay attention to sealing, do not eat, touch the eyes and apply clean water in time for cleaning and treatment.